博客
关于我
强烈建议你试试无所不能的chatGPT,快点击我
MySQL编译安装加入service
阅读量:6784 次
发布时间:2019-06-26

本文共 12374 字,大约阅读时间需要 41 分钟。

hot3.png

centos6.x版本

vi/etc/init.d/mysqld

#!/bin/sh# Copyright Abandoned 1996 TCX DataKonsult AB & Monty Program KB & Detron HB# This file is public domain and comes with NO WARRANTY of any kind# MySQL daemon start/stop script.# Usually this is put in /etc/init.d (at least on machines SYSV R4 based# systems) and linked to /etc/rc3.d/S99mysql and /etc/rc0.d/K01mysql.# When this is done the mysql server will be started when the machine is# started and shut down when the systems goes down.# Comments to support chkconfig on RedHat Linux# chkconfig: 2345 64 36# description: A very fast and reliable SQL database engine.# Comments to support LSB init script conventions### BEGIN INIT INFO# Provides: mysql# Required-Start: $local_fs $network $remote_fs# Should-Start: ypbind nscd ldap ntpd xntpd# Required-Stop: $local_fs $network $remote_fs# Default-Start:  2 3 4 5# Default-Stop: 0 1 6# Short-Description: start and stop MySQL# Description: MySQL is a very fast and reliable SQL database engine.### END INIT INFO# If you install MySQL on some other places than /www/server/mysql, then you# have to do one of the following things for this script to work:## - Run this script from within the MySQL installation directory# - Create a /etc/my.cnf file with the following information:#   [mysqld]#   basedir=
# - Add the above to any other configuration file (for example ~/.my.ini)# and copy my_print_defaults to /usr/bin# - Add the path to the mysql-installation-directory to the basedir variable# below.## If you want to affect other MySQL variables, you should make your changes# in the /etc/my.cnf, ~/.my.cnf or other MySQL configuration files.# If you change base dir, you must also change datadir. These may get# overwritten by settings in the MySQL configuration files.basedir=datadir=# Default value, in seconds, afterwhich the script should timeout waiting# for server start. # Value here is overridden by value in my.cnf. # 0 means don't wait at all# Negative numbers mean to wait indefinitelyservice_startup_timeout=900# Lock directory for RedHat / SuSE.lockdir='/var/lock/subsys'lock_file_path="$lockdir/mysql"# The following variables are only set for letting mysql.server find things.# Set some defaultsmysqld_pid_file_path=if test -z "$basedir"then basedir=/www/server/mysql bindir=/www/server/mysql/bin if test -z "$datadir" then datadir=/www/server/mysql/data fi sbindir=/www/server/mysql/bin libexecdir=/www/server/mysql/binelse bindir="$basedir/bin" if test -z "$datadir" then datadir="$basedir/data" fi sbindir="$basedir/sbin" if test -f "$basedir/bin/mysqld" then libexecdir="$basedir/bin" else libexecdir="$basedir/libexec" fifi# datadir_set is used to determine if datadir was set (and so should be# *not* set inside of the --basedir= handler.)datadir_set=## Use LSB init script functions for printing messages, if possible#lsb_functions="/lib/lsb/init-functions"if test -f $lsb_functions ; then . $lsb_functionselse # Include non-LSB RedHat init functions to make systemctl redirect work init_functions="/etc/init.d/functions" if test -f $init_functions; then . $init_functions fi log_success_msg() { echo " SUCCESS! $@" } log_failure_msg() { echo " ERROR! $@" }fiPATH="/sbin:/usr/sbin:/bin:/usr/bin:$basedir/bin"export PATHmode=$1 # start or stop[ $# -ge 1 ] && shiftcase `echo "testing\c"`,`echo -n testing` in *c*,-n*) echo_n= echo_c= ;; *c*,*) echo_n=-n echo_c= ;; *) echo_n= echo_c='\c' ;;esacparse_server_arguments() { for arg do case "$arg" in --basedir=*) basedir=`echo "$arg" | sed -e 's/^[^=]*=//'` bindir="$basedir/bin" if test -z "$datadir_set"; then datadir="$basedir/data" fi sbindir="$basedir/sbin" if test -f "$basedir/bin/mysqld" then libexecdir="$basedir/bin" else libexecdir="$basedir/libexec" fi libexecdir="$basedir/libexec" ;; --datadir=*) datadir=`echo "$arg" | sed -e 's/^[^=]*=//'` datadir_set=1 ;; --log-basename=*|--hostname=*|--loose-log-basename=*) mysqld_pid_file_path=`echo "$arg.pid" | sed -e 's/^[^=]*=//'` ;; --pid-file=*) mysqld_pid_file_path=`echo "$arg" | sed -e 's/^[^=]*=//'` ;; --service-startup-timeout=*) service_startup_timeout=`echo "$arg" | sed -e 's/^[^=]*=//'` ;; esac done}# Get arguments from the my.cnf file,# the only group, which is read from now on is [mysqld]if test -x "$bindir/my_print_defaults"; then print_defaults="$bindir/my_print_defaults"else # Try to find basedir in /etc/my.cnf conf=/etc/my.cnf print_defaults= if test -r $conf then subpat='^[^=]*basedir[^=]*=\(.*\)$' dirs=`sed -e "/$subpat/!d" -e 's//\1/' $conf` for d in $dirs do d=`echo $d | sed -e 's/[ ]//g'` if test -x "$d/bin/my_print_defaults" then print_defaults="$d/bin/my_print_defaults" break fi done fi # Hope it's in the PATH ... but I doubt it test -z "$print_defaults" && print_defaults="my_print_defaults"fi## Read defaults file from 'basedir'. If there is no defaults file there# check if it's in the old (depricated) place (datadir) and read it from there#extra_args=""if test -r "$basedir/my.cnf"then extra_args="-e $basedir/my.cnf"else if test -r "$datadir/my.cnf" then extra_args="-e $datadir/my.cnf" fifiparse_server_arguments `$print_defaults $extra_args --mysqld mysql.server`parse_server_arguments "$@"# wait for the pid file to disappearwait_for_gone () { pid="$1" # process ID of the program operating on the pid-file pid_file_path="$2" # path to the PID file. i=0 crash_protection="by checking again" while test $i -ne $service_startup_timeout ; do if kill -0 "$pid" 2>/dev/null; then : # the server still runs else if test ! -s "$pid_file_path"; then # no server process and no pid-file? great, we're done! log_success_msg return 0 fi # pid-file exists, the server process doesn't. # it must've crashed, and mysqld_safe will restart it if test -n "$crash_protection"; then crash_protection="" sleep 5 continue # Check again. fi # Cannot help it log_failure_msg "The server quit without updating PID file ($pid_file_path)." return 1 # not waiting any more. fi echo $echo_n ".$echo_c" i=`expr $i + 1` sleep 1 done log_failure_msg return 1}wait_for_ready () { i=0 while test $i -ne $service_startup_timeout ; do if $bindir/mysqladmin ping >/dev/null 2>&1; then log_success_msg return 0 elif kill -0 $! 2>/dev/null ; then : # mysqld_safe is still running else # mysqld_safe is no longer running, abort the wait loop break fi echo $echo_n ".$echo_c" i=`expr $i + 1` sleep 1 done log_failure_msg return 1}## Set pid file if not given#if test -z "$mysqld_pid_file_path"then mysqld_pid_file_path=$datadir/`hostname`.pidelse case "$mysqld_pid_file_path" in /* ) ;; * ) mysqld_pid_file_path="$datadir/$mysqld_pid_file_path" ;; esacfi# source other config files[ -f /etc/default/mysql ] && . /etc/default/mysql[ -f /etc/sysconfig/mysql ] && . /etc/sysconfig/mysql[ -f /etc/conf.d/mysql ] && . /etc/conf.d/mysqlcase "$mode" in 'start') # Start daemon # Safeguard (relative paths, core dumps..) cd $basedir echo $echo_n "Starting MySQL" if test -x $bindir/mysqld_safe then # Give extra arguments to mysqld with the my.cnf file. This script # may be overwritten at next upgrade. $bindir/mysqld_safe --datadir="$datadir" --pid-file="$mysqld_pid_file_path" "$@" & wait_for_ready; return_value=$? # Make lock for RedHat / SuSE if test -w "$lockdir" then touch "$lock_file_path" fi exit $return_value else log_failure_msg "Couldn't find MySQL server ($bindir/mysqld_safe)" fi ;; 'stop') # Stop daemon. We use a signal here to avoid having to know the # root password. if test -s "$mysqld_pid_file_path" then mysqld_pid=`cat "$mysqld_pid_file_path"` if (kill -0 $mysqld_pid 2>/dev/null) then echo $echo_n "Shutting down MySQL" kill $mysqld_pid # mysqld should remove the pid file when it exits, so wait for it. wait_for_gone $mysqld_pid "$mysqld_pid_file_path"; return_value=$? else log_failure_msg "MySQL server process #$mysqld_pid is not running!" rm "$mysqld_pid_file_path" fi # Delete lock for RedHat / SuSE if test -f "$lock_file_path" then rm -f "$lock_file_path" fi exit $return_value else log_failure_msg "MySQL server PID file could not be found!" fi ;; 'restart') # Stop the service and regardless of whether it was # running or not, start it again. if $0 stop "$@"; then if ! $0 start "$@"; then log_failure_msg "Failed to restart server." exit 1 fi else log_failure_msg "Failed to stop running server, so refusing to try to start." exit 1 fi ;; 'reload'|'force-reload') if test -s "$mysqld_pid_file_path" ; then read mysqld_pid < "$mysqld_pid_file_path" kill -HUP $mysqld_pid && log_success_msg "Reloading service MySQL" touch "$mysqld_pid_file_path" else log_failure_msg "MySQL PID file could not be found!" exit 1 fi ;; 'status') # First, check to see if pid file exists if test -s "$mysqld_pid_file_path" ; then read mysqld_pid < "$mysqld_pid_file_path" if kill -0 $mysqld_pid 2>/dev/null ; then log_success_msg "MySQL running ($mysqld_pid)" exit 0 else log_failure_msg "MySQL is not running, but PID file exists" exit 1 fi else # Try to find appropriate mysqld process mysqld_pid=`pgrep $libexecdir/mysqld` # test if multiple pids exist pid_count=`echo $mysqld_pid | wc -w` if test $pid_count -gt 1 ; then log_failure_msg "Multiple MySQL running but PID file could not be found ($mysqld_pid)" exit 5 elif test -z $mysqld_pid ; then if test -f "$lock_file_path" ; then log_failure_msg "MySQL is not running, but lock file ($lock_file_path) exists" exit 2 fi log_failure_msg "MySQL is not running" exit 3 else log_failure_msg "MySQL is running but PID file could not be found" exit 4 fi fi ;; 'configtest') # Safeguard (relative paths, core dumps..) cd $basedir echo $echo_n "Testing MySQL configuration syntax" daemon=$bindir/mysqld if test -x $libexecdir/mysqld then daemon=$libexecdir/mysqld elif test -x $sbindir/mysqld then daemon=$sbindir/mysqld elif test -x `which mysqld` then daemon=`which mysqld` else log_failure_msg "Unable to locate the mysqld binary!" exit 1 fi help_out=`$daemon --help 2>&1`; r=$? if test "$r" != 0 ; then log_failure_msg "$help_out" log_failure_msg "There are syntax errors in the server configuration. Please fix them!" else log_success_msg "Syntax OK" fi exit $r ;; 'bootstrap') if test "$_use_systemctl" == 1 ; then log_failure_msg "Please use galera_new_cluster to start the mariadb service with --wsrep-new-cluster" exit 1 fi # Bootstrap the cluster, start the first node # that initiate the cluster echo $echo_n "Bootstrapping the cluster.. " $0 start $other_args --wsrep-new-cluster exit $? ;; *) # usage basename=`basename "$0"` echo "Usage: $basename {start|stop|restart|reload|force-reload|status|configtest|bootstrap} [ MySQL server options ]" exit 1 ;;esacexit 0

chmod 755 /etc/init.d/mysqld

chkconfig --add mysqld
chkconfig mysqld on


centos7.x版本

vim /usr/lib/systemd/system/mysqld.service

[Unit]Description=mysqlAfter=network.target remote-fs.target nss-lookup.target[Service]Type=forkingExecStart=/usr/local/mysql/support-files/mysql.server start#ExecReload=/usr/local/mysql/support-files/mysql.server restart#ExecStop=/usr/local/mysql/support-files/mysql.server stop#PrivateTmp=true[Install]WantedBy=multi-user.target

systemctl enable mysqld.service

systemctl start mysqld.service

转载于:https://my.oschina.net/zhaojunhui/blog/1619970

你可能感兴趣的文章